Nano-D Hermetic Connectors (.025" Contact Pitch)
PA&E's Nano-D connectors are compatible with lightweight materials such as aluminum and titanium, as well as conventional iron/nickel alloys. They are designed for use in military, space, and commercial applications where environmental conditions require an extremely rugged and reliable hermetic seal. The unique controlled CTE characteristics, chemical bonding properties and polycrystalline structure of Kryoflex,® allow PA&E to manufacture this part with a 304L stainless steel shell and gold-plated beryllium-copper contacts for excellent electrical performance and environmental characteristics. These hermetic connectors can be produced for both laser-weld and solder-in applications.
PA&E's hermetically-sealed Nano-D connectors are manufactured to exceed the requirements of MIL-DTL-32139.
Download the Rectangular DC Connectors Data Sheet (PDF 320 KB)
PAE-ND Series 100 - Low Profile, Flanged
Aluminum Compatible
0-93867 (Sales Drawing) (PDF 132 KB)
Titanium Compatible
0-94075 (Sales Drawing) (PDF 132 KB)
PAE-ND Series 200 - Standard Profile, Flanged
Aluminum Compatible
0-93867 (Sales Drawing) (PDF 132 KB)
Titanium Compatible
0-94075 (Sales Drawing) (PDF 132 KB)
Nano-D Hermetic Connectors Specifications and Testing Configuration
|
PERFORMANCE CONFIGURATIONS |
NANO-D |
|
STD PROFILE |
LOW PROFILE |
|
SPECIFICATIONS |
MATERIAL COMPATIBILITY |
Designed for Aluminum, Titanium or Iron/Nickel Alloy applications |
|
CONTACT MATERIAL |
303 Stainless Steel/Inconel X-750 |
|
SHELL FINISH OPTIONS |
Passivated, Nickel/Gold Plated or Chromate Conversion Coated as applicable |
|
CONTACT FINISH |
Nickel/Gold Plating |
|
INTERFACE |
Per MIL-DTL-32139 |
|
NO. OF CONTACTS |
9,15,21,25,31,37,51 |
|
OPT. SOLDER CUP |
Contact PA&E |
|
PERFORMANCE |
LEAK RATE |
Less than 1X10-9cc/sec Helium at 1 atmospheric differential pressure |
|
INSULATION RESISTANCE |
Connectors provide greater than 5,000 Megohms at 500 VDC when tested in IAW MIL-STD-1344, Method 3003 |
|
DIELECTRIC WITHSTANDING VOLTAGE |
Connectors exhibit no evidence of breakdown or flashover when tested in IAW MIL-STD-1344, Method 3003 |
|
CORROSION |
Connectors meet salt spray test in IAW MIL-STD-1344, Method 3003 |
|
OPERATING TEMPERATURE |
-65°C to 200°C |
|
